Estimating and takeoff
Core services from professional construction estimators in Connecticut.
Construction EstimatingQuantity TakeoffBid EstimatingBlueprint TakeoffBIM EstimatingArchitectural CostXactimate Estimating
CT-01
Estimating Buddies LLC is a construction estimating company that prepares quantity takeoffs and cost estimates from your drawings. Send plans for a Connecticut project and get organized quantities, trade-level costs, and an estimate summary your team can use to bid, budget, or decide.
Project Cost Studio
CT-01
CT-02 · Services
As a construction estimating company in Connecticut, we cover the whole set: general quantity takeoff services, single-trade pricing, and full contractor estimating services in Connecticut. Pick the sheet that matches your drawings.
Core services from professional construction estimators in Connecticut.
MEP estimating Connecticut projects need, from rough-in to equipment.
Construction takeoff services Connecticut contractors request for the frame and envelope.
Residential construction estimating Connecticut owners and builders can review line by line.
CT-11 · Connecticut Service Directory
The following Connecticut estimating services are available for contractors, builders, developers, and project teams. Each service is organized around the specific scope shown in the project drawings.
CT-S01
Plumbing estimating for Connecticut projects, covering fixtures, piping, sanitary systems, domestic water, and related installation quantities. Estimates are organized by trade scope so contractors can review quantities and costs clearly.
CT-S02
Construction estimating for Connecticut contractors, builders, and project teams. We organize labor, materials, equipment, and general conditions into a practical estimate for bidding, budgeting, or project planning.
CT-S03
Mechanical estimating for Connecticut buildings, including HVAC equipment, ductwork, piping, ventilation, and related mechanical scopes. Quantities and costs are presented in a trade-focused format.
CT-S04
Architectural cost estimating in Connecticut for finishes, building envelope components, interiors, and other architectural scopes. The estimate helps teams understand projected costs from the drawing set.
CT-S05
Quantity takeoff services in Connecticut with measured quantities organized by trade and project scope. Takeoffs can support contractor pricing, bid preparation, budgeting, and cost review.
CT-S06
Electrical estimating for Connecticut projects, including power distribution, lighting, panels, feeders, devices, and related electrical work. Scope is measured from the available drawings and documents.
CT-S07
MEP estimating services in Connecticut combining mechanical, electrical, and plumbing scopes into a coordinated cost view. This format helps identify trade quantities and scope relationships across the project.
CT-S08
BIM estimating services in Connecticut using model information to support quantity extraction and cost planning. Model-based quantities can be organized by building element, trade, or project requirement.
CT-S09
Blueprint estimating services in Connecticut for construction drawings, plan sets, details, and specifications. The work focuses on reading the available documents and turning drawing information into organized quantities and costs.
CT-S10
Xactimate estimating services in Connecticut for property damage and restoration scopes. Estimates can organize repair quantities, line items, and supporting scope information for restoration work.
CT-S11
Single-family residential estimating in Connecticut for new homes, additions, renovations, and remodeling projects. Costs can be organized across foundations, framing, exterior work, systems, and finishes.
CT-03 · Projects, clients, coverage
From a kitchen remodel to a school addition, we handle commercial construction estimating in Connecticut and residential work with equal care.
CT-03 · Clients
Contractors, builders, developers, and architects use our estimates, and property owners can request one to understand scope before hiring.
CT-03 · Coverage
Hartford, New Haven, Stamford, Fairfield County, and surrounding Connecticut areas.
And surrounding Connecticut areas.
CT-04 · Project Cost Studio
Inside the studio, a drawing set moves left to right: measured quantities first, then trade costs, then one summary you can read at a glance.
01
Drawings, specifications, and addenda are read sheet by sheet.
02
Areas, lengths, volumes, and counts are measured and grouped by trade.
03
Each trade's quantities are priced from two sides.
04
Trade totals roll into one summary with assumptions and exclusions.
Sample sheet layout
Units and sources shown for illustration. Actual figures depend on each project.
Connecticut sample sheet
Labor and materials
| Trade | Takeoff unit | Measured from | Labor side | Material side |
|---|---|---|---|---|
| Concrete | CY / SF | Foundation plans, details | Forming, placing, finishing | Concrete, forms, reinforcement |
| Roofing | SQ | Roof plan, elevations | Tear-off, installation | Shingles, underlayment, flashing |
| Drywall | SF | Floor plans, wall types | Hanging, taping, finishing | Board, compound, fasteners |
| HVAC | EA / LF | Mechanical plans, schedules | Equipment set, duct install | Units, ductwork, fittings |
| Painting | SF | Finish schedule, elevations | Prep and application | Primer, paint, supplies |
CT-05 · Workflow
STEP 1
Send plans, specifications, addenda, and your bid date. We confirm the set is readable and current.
STEP 2
We agree on which trades and inclusions are priced, and list what is excluded or assumed.
STEP 3
Takeoff is measured on the drawings and organized by trade.
STEP 4
Labor, materials, and project conditions are priced and rolled into a summary.
STEP 5
You review the estimate, ask questions, and use it to bid, budget, negotiate, or buy out work.
CT-06 · Software
We use software construction teams already know, so files and measurements move easily between your office and ours.
PS
BB
XA
OS
AC
RV
TR
RS
CT-07 · Local conditions
Good bid estimating services in Connecticut start with the conditions that move a price.
Clear inclusions and exclusions keep trade bids comparable and prevent gaps at buyout.
Older homes and mixed-use buildings in Connecticut's cities and historic towns often hide conditions behind finishes.
Demolition, protection, patching, and tie-ins to existing work get their own line items.
Tell us if the work is public or has special labor rules so crew assumptions match.
Lead times and specified products can affect pricing and schedule assumptions.
Grade changes, rock, drainage, and tight access affect sitework and staging.
Dense cities, coastal towns, and rural sites differ in deliveries, parking, and mobilization.
Share your due date upfront so the review order fits your submission window.
CT-08 · Deliverables
Every construction cost estimate is built so your team can trace each number.
Included
Checklist
Tick through it before you bid.
0 of 8
CT-09 · Why us
Teams looking for construction estimators in Connecticut want numbers they can trace and explain.
Results are organized the way subs and GCs build bid sheets.
Structure, shell, finishes, and MEP can be requested from one team.
Inclusions and exclusions are written down, not implied.
Order takeoff only, or pricing with it, for one trade or many.
Submit drawings
Send plans and specs, tell us the bid date and trades, and request an estimate. We will review the set and come back with any questions before pricing starts.
CT-10 · Questions
Yes. Estimating Buddies prepares estimates for projects in Hartford, New Haven, Stamford, Fairfield County, and surrounding areas from the drawings and details you send.
Send plans, specifications, addenda, and scope notes. Include the project address, bid deadline, and whether the work is public or private so assumptions fit.