01
Plans
We review drawings, specifications, and addenda.
OR
Estimating Buddies LLC helps construction teams put clear numbers behind their drawings. Our estimators prepare quantity takeoffs and cost estimates that turn plans into budgets, bids, and buyout decisions. We support contractors, builders, subcontractors, developers, architects, engineers, and other construction professionals across the USA and Canada, and this page is written for Oregon projects.
Whether you need one trade priced before a bid is due or a full cost plan for a ground-up building, the work centers on one question: what will this project take? Expect measured quantities, labor and material costing, written assumptions, and a summary built for budgeting, bid preparation, and construction cost planning. Every estimate is prepared from the drawings and project information you send.
Estimate log - OR
Oregon
Oregon
Use this page as your starting point. Choose the service you need, see how drawings become a cost plan, and send your plans when you are ready. Every Oregon project moves through the same five stages.
01
We review drawings, specifications, and addenda.
02
We confirm trades, inclusions, and exclusions.
03
Quantities are measured from the plans.
04
Labor and materials are priced by trade.
05
Totals roll into a clear summary.
Services
Looking for an estimating company in Oregon that handles both takeoff and pricing? Our construction estimating services in Oregon range from a single trade to a complete project, so our contractor estimating services in Oregon can match your bid list. Every quantity takeoff starts with your drawings.
Core work from professional estimators in Oregon.
Pricing from your mechanical, electrical, plumbing, and life-safety sheets.
Construction takeoff services in Oregon for the frame, envelope, and site.
Residential estimating services in Oregon and commercial estimating services in Oregon, plus interior finishes.
Service detail
A closer look at what each service covers when you send us Oregon plans.
OR-01
Complete cost estimates built from your drawings and specifications. Work is organized by trade, with labor, material costs, assumptions, and a summary for bidding or budgeting.
Explore construction estimatingOR-02
Measured counts, areas, lengths, and volumes grouped by trade. Order takeoff on its own, or use it as the base for pricing.
Explore quantity takeoffOR-03
Fixtures, piping, rough-in, and equipment taken from plumbing plans and schedules, with labor and material pricing.
Explore plumbing estimatingOR-04
Equipment, ductwork, piping, and controls measured from mechanical drawings and priced for your bid.
Explore mechanical estimatingOR-05
Devices, fixtures, panels, wire, and conduit counted from electrical plans, with labor for rough-in and trim.
Explore electrical estimatingOR-06
Mechanical, electrical, and plumbing scopes priced together, so overlaps and gaps between systems are flagged early.
Explore MEP estimatingOR-07
Finishes, building elements, and assemblies priced from architectural sheets, from early budgets to detailed estimates.
Explore architectural cost estimatingOR-08
Model-based quantities pulled from Revit and other BIM files, tied back to the elements in the model.
Explore BIM estimatingOR-09
Plan sets read sheet by sheet, whether paper scans or PDFs, with measurements organized for pricing.
Explore blueprint estimatingOR-10
Line-item repair and restoration estimates for scopes such as water, fire, and storm damage.
Explore Xactimate estimatingOR-11
New homes, additions, and remodels broken down by trade, for builders, remodelers, and homeowners planning a project.
Explore single-family residential estimatingCoverage
Project types we estimate from the drawings and project information you send.
Clients
Contractors, builders, developers, architects, and property owners can request an estimate from the plans they send.
Locations
Portland, Eugene, Salem, Bend, Medford, and surrounding Oregon areas.
Drawings to dollars
Here is how a drawing set becomes a number you can use. Each trade follows the same path from sheet to subtotal. The rows below are illustrative, and actual line items depend on your plans.
Sheet to subtotal
Illustrative rows
| Drawing input | Quantities | Labor | Materials | Summary line |
|---|---|---|---|---|
| Foundation and slab plans | Concrete CY, formwork SF, rebar LB | Forming, placing, finishing | Concrete, forms, reinforcing | Concrete subtotal |
| Framing and wall sections | Studs, plates, sheathing | Framing crews | Lumber, sheathing, hardware | Framing subtotal |
| Roof plan and details | Roof area SQ, flashing LF | Tear-off, installation | Roofing, underlayment, flashing | Roofing subtotal |
| Electrical plans | Fixture, device, and wire counts | Rough-in and trim | Fixtures, wire, panels | Electrical subtotal |
| Site and grading plans | Cut, fill, and paving areas | Equipment and crew time | Aggregate, pipe, asphalt | Sitework subtotal |
Trade subtotals feed one final estimate summary, so you can compare scope, spot gaps, and build your bid with confidence in where each number came from.
Workflow
From the drawings you send to a summary, breakdowns, and notes you can review.
01
Send drawings, specifications, addenda, and your due date.
02
We list what is priced, what is excluded, and what is assumed.
03
Quantities are measured and grouped by trade.
04
Labor and material costs are applied to each quantity.
05
You receive the summary, breakdowns, and notes, and can ask questions or request revisions.
Tools
We use construction software your team likely knows, so measurements and files move easily between us.
PS
Digital takeoffs from plan images, including areas, lengths, and counts.
BB
PDF drawing review, markups, and measurements.
OT
On-screen measuring with organized quantity output.
XA
Line-item repair and restoration estimates.
RV
Model-based quantities from BIM files.
AC
CAD drawing review and measurement.
TR
Estimating and model-based construction workflows.
RS
Construction cost data used as a unit-cost reference.
Local conditions
Good bid estimating services in Oregon account for conditions that move a price. We ask about these early.
The Portland metro area, the Willamette Valley, the coast, and Central or Eastern Oregon differ in deliveries, access, and mobilization.
Public or publicly funded work may carry specific wage rules. Tell us so crew assumptions fit.
Lead times on specified products, steel, and engineered lumber can shape pricing.
Slopes, wet soils, tree cover, drainage, and erosion control can change sitework quantities.
Wood-frame homes, steel-framed commercial buildings, and multifamily projects price differently.
Demolition, protection, and tie-ins to existing work need their own lines.
Wet winters in western Oregon and colder or drier conditions elsewhere can affect schedule and cost assumptions. Seismic and fire-resistance requirements shown on the drawings are priced as detailed.
Share your due date so our review order fits your submission window.
Deliverables
Each estimate is organized so your team can trace every line back to the plans.
Measured from the drawings and grouped by trade.
Crew time and labor costs for each trade.
Priced from your quantities and specifications.
A separate section for each trade in your scope.
Items we interpreted from the drawings, written in plain language.
Work that is not priced, so nothing is left unstated.
Trade totals in one view for bid or budget review.
Review
Before an estimate goes out, it moves through a review checklist.
Every sheet in the set is accounted for.
Key measurements are rechecked against the plans.
Overlaps and gaps between trades are flagged.
Repeated line items are found and removed.
Unit costs and labor assumptions are reviewed.
Notes are checked for clarity.
Addenda and plan changes are tracked in updates.
Open questions are flagged for your team to resolve before you bid.
Why choose us
Teams searching for construction estimators in Oregon want numbers they can trace and explain. Here is what they get:
Numbers that match how bids are built.
From concrete and rebar to MEP and finishes.
Included on every estimate.
Takeoff only, full pricing, one trade, or many.
Submit plans
Upload your drawings, tell us the trades and your deadline, and we will review the set and follow up with any questions before pricing starts. Please include:
Questions we hear about Oregon estimates
Yes. We prepare estimates for projects in Portland, Eugene, Salem, Bend, Medford, and surrounding areas from the drawings and details you send.
Send plans, specifications, addenda, and scope notes. Include the project address, your bid deadline, and whether the work is public or private.