Charlotte Metro
Banking, high-rise, and fast schedules
Core-and-shell, tenant improvement, and mixed-use electrical work across Mecklenburg and surrounding counties, where union and non-union labor pools both bid.
Cost estimates, quantity takeoffs, and bid-day pricing for electrical scopes - from a Charlotte high-rise core-and-shell to a Research Triangle data hall. We read the one-lines and panel schedules so your estimator isn't starting from zero.
Material takeoff
PANEL · FEEDER · LIGHTING
PNL-2
XFMR
Project
Data Hall · RTP
County
Wake, NC
Service
480/277V, 3-Phase
Status
Ready for pricing
48hr
Typical turnaround on a standard takeoff
NC
Code & licensing-aware scoping
5
North Carolina regions covered
Five markets, one state
A tenant fit-out uptown in Charlotte, a hyperscale data hall in Wake County, a furniture-plant retrofit in the Triad, a hospital wing on the coast, and a lodge outside Asheville all price against different labor pools, utilities, and code amendments. We scope for the market the project is actually in.
Banking, high-rise, and fast schedules
Core-and-shell, tenant improvement, and mixed-use electrical work across Mecklenburg and surrounding counties, where union and non-union labor pools both bid.
Data centers and semiconductor build-out
Raleigh, Durham, and Cary carry heavy-load electrical scopes - data hall power distribution, redundant switchgear, and utility interconnection sized well past a typical commercial job.
Manufacturing and logistics power
Greensboro, Winston-Salem, and High Point mix warehouse and manufacturing electrical retrofits with steady light-industrial new construction.
Storm-rated equipment and base-adjacent work
Wilmington, Fayetteville, and Jacksonville projects bring wind-rated enclosures, flood-elevated equipment, and federal wage requirements near Fort Liberty and Camp Lejeune.
Mountain terrain and hospitality builds
Asheville and the surrounding counties see hospitality, healthcare, and custom residential electrical work shaped by elevation, terrain, and rural utility coordination.
What we estimate
Each service below can run standalone or as part of a full estimating package, priced to match the stage your bid is actually at.
REF.01
A full labor-and-material cost estimate built from your one-lines, panel schedules, and specs, formatted to drop straight into your bid.
REF.02
Conduit, wire, devices, and fixtures counted and measured off the drawings, broken out by panel, floor, or phase.
REF.03
A supplier-ready material list - sized, specced, and quantified - you can send straight out for pricing.
REF.04
Bid-day pricing turned around against your deadline, with a scope summary you can hand to the GC without editing.
REF.05
Early, drawing-light pricing for owners and design teams testing a project's electrical service size and cost before construction documents exist.
REF.06
Fast, defensible pricing on scope changes mid-project, cross-referenced against the original estimate so nothing gets double-billed.
REF.07
Electrical takeoffs cross-checked against mechanical and plumbing scope where systems share chases, ceilings, or shaft space.
REF.08
Data, security, fire alarm, and structured cabling scopes priced alongside - or separately from - the main power distribution estimate.
REF.09
Heavy-load electrical estimating for manufacturing plants and data halls, including redundant switchgear and utility service coordination.
System coverage
Mapped the way a panel schedule and one-line already organize a project, so cross-referencing our takeoff against your drawings is quick.
PWR-01
Switchgear, panelboards, transformers, feeders.
BRN-02
Receptacles, devices, and branch circuit runs.
LTG-03
Fixtures, dimming, and lighting control systems.
LOV-04
Structured cabling, data racks, and telecom rough-in.
FA-05
Devices, panels, and notification circuits.
GEN-06
Standby generators, transfer switches, life-safety branch.
EVC-07
Charger circuits, panel capacity, and site infrastructure.
DC-08
Redundant switchgear, UPS, and critical-load distribution.
Who we estimate for
Commercial, custom residential, industrial, data center, healthcare, and military-adjacent work - each scoped for the North Carolina market the project sits in.
North Carolina-specific
Code, licensing, and utility details that change what an NC electrical scope actually costs, built into the takeoff rather than left for you to catch later.
Code
North Carolina's electrical code is based on the National Electrical Code with state-specific amendments - our takeoffs flag where local jurisdictions layer on further requirements.
Licensing
Electrical contractors are licensed through the state licensing board; our scopes are written to match how a licensed NC electrical contractor actually bids.
Utility
Data center and manufacturing projects in the Triangle and Piedmont often require early utility coordination for large service capacity - a step we build into the estimate timeline.
Coastal
New Hanover and neighboring coastal counties often call for wind-rated enclosures and elevated equipment placement that change both quantities and labor.
Federal
Projects tied to Fort Liberty and Camp Lejeune can carry federal prevailing wage and certified payroll requirements factored into labor pricing.
Historic
Asheville, New Bern, and similar districts can add fixture and conduit-routing constraints that a standard commercial takeoff won't anticipate.
How it works
Six steps from the plan set you send to a priced takeoff formatted for your bid.
01 / Share
Upload one-lines, panel schedules, and specs. Incomplete sets are fine - we'll flag what's missing before we start pricing.
02 / Scope
A short scope confirmation makes sure we're pricing exactly what you're bidding - no assumptions baked in silently.
03 / Takeoff
Every system gets measured and counted directly from the drawings, organized by panel, area, or phase.
04 / Price
Current material pricing and regional labor rates are applied against the takeoff to build the full cost estimate.
05 / Review
A second estimator checks quantities and pricing against the drawings before anything goes out the door.
06 / Deliver
Spreadsheet, PDF, or CSI-formatted breakdown - whichever drops straight into your bid.
Sample output
An illustrative slice of a panel and feeder takeoff from a Raleigh office building - quantities shown, pricing withheld since it's for reference only.
6-Story Office Core-and-Shell · Raleigh, NC
POWER DISTRIBUTION EXCERPT
System
Item
Qty
Unit
Notes
Feeders
4/0 THHN copper, 4-wire
1,420
LF
Main switchboard to distribution panels
Distribution
225A panelboard, 42-circuit
6
EA
One per floor
Branch Wiring
#12 THHN copper
18,600
LF
Receptacle and lighting branch circuits
Devices
20A duplex receptacle
312
EA
Office and common area
Emergency
Automatic transfer switch, 400A
1
EA
Life-safety branch
Illustrative excerpt only - actual takeoffs are itemized to the full system, cross-referenced to sheet and panel schedule, and delivered with unit and extended pricing.
Tools & cost data
We work directly in the takeoff and estimating software most North Carolina electrical contractors already use, so our output matches your workflow.
Accubid
Electrical estimating
ConEst
Electrical estimating
Bluebeam Revu
Digital takeoff & markup
PlanSwift
Quantity takeoff
Trimble
Takeoff & estimating
RSMeans cost data
Cost data
Current supplier quotes
Material pricing
Where we work
Five regions, from Charlotte Metro and the Research Triangle through the Piedmont Triad, the coast, and western North Carolina.
Accuracy & review
Quantities, pricing, and assumptions are reviewed against the drawings before the takeoff is delivered.
A second estimator checks quantities and pricing against the drawings before anything goes out the door.
Incomplete sets are fine - we'll flag what's missing before we start pricing, so the estimate isn't built on a silent gap.
A short scope confirmation makes sure we're pricing exactly what you're bidding - no assumptions baked in silently.
Actual takeoffs are itemized to the full system, cross-referenced to sheet and panel schedule, and delivered with unit and extended pricing.
Why contractors use this estimate
A Charlotte tenant fit-out, a Wake County data hall, and a coastal hospital wing are estimated around the labor, utility, and code conditions those bids actually carry.
01
Charlotte, the Triangle, the Triad, the coast, and western North Carolina price against different labor pools, utilities, and code amendments.
02
State electrical code amendments, licensing-aware scopes, and local jurisdiction requirements are flagged in the estimate.
03
Current material pricing and regional labor rates are applied against the takeoff, including prevailing wage where federal work requires it.
04
Spreadsheet, PDF, or CSI-formatted breakdown - whichever drops straight into your bid.
05
Mid-project scope changes are priced against the original estimate so nothing gets double-billed.
06
Each service can run standalone or as part of a full estimating package, priced to match the stage your bid is actually at.
What drives the price
What moves the cost of an electrical estimate itself - separate from the cost of the electrical work being estimated.
01
Larger takeoffs and higher-capacity services take longer to measure and QA, though repeat floor plans reduce per-unit effort.
02
Full one-lines and panel schedules price faster and more precisely than conceptual or partial sets, which need more assumptions.
03
Same-day or next-day bid deadlines carry a rush consideration versus a standard multi-day turnaround.
04
A standard tenant fit-out estimates faster than a data hall with redundant switchgear and utility coordination.
05
A raw quantity list is quicker to produce than a fully formatted, CSI-coded bid package with narrative scope.
Send us a set of plans
Upload one-lines, panel schedules, and specs. Incomplete sets are fine - we'll flag what's missing and confirm scope before pricing starts.
Questions
Yes. We cover five North Carolina regions: Charlotte Metro, Research Triangle, Piedmont Triad, Coastal & Military, and Western North Carolina - including Greensboro, Wilmington, Fayetteville, Jacksonville, Asheville, and Hickory. You can start from the home page to see the complete estimating lineup.
Upload one-lines, panel schedules, and specs. Incomplete sets are fine - we'll flag what's missing before we start pricing, then confirm scope and systems so we're pricing exactly what you're bidding. When that trade is on the plans, our HVAC estimating services can price it with the same set.